Strip Out Demolition
Internal strip-out demolition for renovations — walls, floors, fixtures and fit-out removed down to a clean shell, ready for your trades.
Learn more →What gets stripped out?
Almost anything inside the building: wall and floor tiles, kitchen cabinetry, bathroom fixtures, carpet and timber flooring, office partitions, suspended ceilings, shop fit-outs and non-structural internal walls. The building stays; the interior comes out.
- Strip out demolition — whole-house, apartment and commercial internal strip outs, back to a clean shell.
- Bathroom demolition — tiles, bath, shower screen, vanity and toilet out, ready for waterproofing.
- Kitchen demolition — cabinets, benchtops, splashbacks and appliances removed for the new fit-out.
- Office strip outs — partitions, ceilings and floor coverings cleared for make-good or refurbishment.
- Floor and tile removal — coverings and adhesive off, down to slab or subfloor.
- Internal wall removal — stud and masonry walls opened up, with engineering where the wall is load-bearing.
How does the job run?
Four steps, the same every time.
- Walk-through and fixed quote. We look at what is coming out, how bins and gear get in, and whether anything needs testing first. You get a fixed price in writing — not an hourly rate that drifts.
- Protection and isolation. Floors and paths protected, dust sealed off from the rest of the house, and power and water isolated at the points your electrician and plumber nominate.
- The strip. Fixtures, coverings and fit-out out in a deliberate order so nothing that stays gets damaged.
- Clean handover. Debris carted away, the site swept, and the space handed over ready for the next trade. That last step is the whole point.
Why strip out before booking trades?
Because demolition is the stage where surprises live. Perth housing stock is heavy on double-brick and render, and older homes — roughly pre-1990 — have a real chance of containing asbestos sheeting behind tiles or in wet-area walls. Finding that out mid-renovation, with a tiler booked for Monday, is expensive. Finding it out during a stand-alone strip out, before anyone else is scheduled, is just a line on a plan.
There is also a scheduling payoff: a stripped room can be measured exactly. Cabinetmakers, tilers and glaziers quoting off a bare shell quote the real room, not the room as it was hiding behind the old fit-out.
Where do we work?
Across the Perth metro area — Victoria Park, Subiaco, Fremantle, Joondalup, Morley, Canning Vale, Osborne Park, Scarborough, Midland, Applecross, Belmont and Cockburn Central among them. Homes, apartments, offices and shops. See Areas We Cover for the full spread, and Pricing for typical Perth strip-out costs by job type.
Call (08) 6171 2654 for a fixed written quote.
Why choose us
Local specialists you can rely on
Clean Handover
Site swept and cleared before we leave — your trades walk into a job ready to start.
Fixed Written Quotes
A fixed price in writing before any work starts — no surprises on the invoice.
One Point of Contact
The same contact from your first enquiry through to handover, quote to completion.
Residential & Commercial
Strip outs for homes, apartments, offices and retail fit-outs across the Perth metro area.
Our services
What we do across Perth
Bathroom Demolition
Full bathroom strip-out — tiles, tubs, vanities and fixtures removed and cleared, ready for the reno to start.
Learn more → Kitchen Demolition
Cabinetry, benchtops, splashbacks and appliances stripped out and removed, leaving a clear space for the new kitchen fit-out.
Learn more → Office Strip Outs
Commercial office strip-outs — partitions, ceilings, flooring and fit-out cleared for lease make-good or refurbishment.
Learn more → Floor and Tile Removal
Removal of tiles, timber, carpet and underlay down to the slab or subfloor, swept and ready for the next finish.
Learn more → Internal Wall Removal
Removal of internal stud and masonry walls to open up a floor plan, with debris cleared from site.
Learn more →
Areas serviced
Proudly serving the local area
Victoria ParkSubiacoFremantleJoondalupMorleyCanning ValeOsborne ParkScarboroughMidlandApplecrossBelmontCockburn Central
FAQs
Frequently asked questions
What is a strip out, exactly?
A strip out is internal demolition: removing the fit-out of a room or building — tiles, cabinets, fixtures, floor coverings, partition walls, ceilings — without demolishing the building itself. The structure stays; the interior comes out. It is the first stage of almost every renovation, and doing it as a separate, properly-managed job means your builder or trades start on a clean, empty shell instead of losing days to demolition they did not price properly.
How much does strip out demolition cost in Perth?
It depends on the rooms involved, the materials being removed, access for bins and equipment, and whether asbestos testing is needed. A single bathroom is a very different job to a 300 square metre office floor. Every job gets a fixed written quote after a site walk-through, and our Pricing page sets out typical Perth cost ranges by job type so you can sanity-check any quote you receive.
Do I need a permit for internal demolition in Perth?
Often no — removing non-structural fit-out like cabinets, tiles and floor coverings generally does not need a demolition permit under the Building Act 2011 (WA). Work that affects the structure, such as removing a load-bearing wall, is a different story and may need a permit through your local council. Rules vary between Perth councils, so confirm your specific job with them before work starts — our Permits page explains what applies when.
Free, no-obligation